現貨威托壓力繼電器閥WMAP-160

現貨威托壓力繼電器閥WMAP-160

威托wato WMAP型壓力繼電器 
WMAP-160 
WMAP-40 
WMAP-80 
WMAP-320
WMAP-210MAP-160 MAP-40 MAP-80 MAP-320MAP-210

主要性能
壓力繼電器的主要性能有以下幾個方面。
(1)調壓范圍
壓力繼電器能夠發出電信號的低工作壓力和高工作壓力的范圍稱為調壓范圍。
(2)靈敏度與通斷調節區間
系統壓力升高到壓力繼電器的調定值時，壓力繼電器動作接通電信號的壓力稱為開啟壓力；系統壓力降低，壓力繼電器復位切斷電信號的壓力稱為閉合壓力。開啟壓力與閉合壓力的差值稱為壓力繼電器的靈敏度。差值小則靈敏度高。為避免系統壓力波動時壓力繼電器時通時斷，要求開啟壓力與閉合壓力有一定的差值，此差值若可調，則稱為通斷調節區間。
(3)升壓或降壓動作時間
壓力繼電器入口側壓力由卸荷壓力升至調定壓力時，微動開關觸點接通發出電信號的時間稱為升壓動作時間，反之，壓力下降，觸點斷開發出斷電信號的時間稱為降壓動作時間。
(4)重復精度
在一定的調定壓力下，多次升壓(或降壓)過程中，開啟壓力或閉合壓力本身的差值稱為重復精度，差值小則重復精度高。 [4] 
選用標準
根據所測對象的壓力來選用,比如所測壓力范圍在8KG以內,那么就要選用額定10KG的壓力繼電器,還有要符合電路中的額定電壓,接口管徑的大小。
威托WATO NHE 型片式換向閥
威托WDP型液控方向閥
WATO WDP-24WATO WDP-35WATO液壓閥線圈
WCAE-24DCWCAE-220AC
WCOE-24DCWCOE-220AC

WJPR系列WATO液壓閥供應威托WATO液壓閥壓力繼電器。
威托wato WGAM型先導式溢流閥 WATO WGAM-20/10/210 WATO WGAM-10/11/210 WATO WGAM-32/11/210
威托WATO WGIR WGIU型壓力控制閥
WATO WGIU-R-10WATO WGIU-20WATO WGIR-20WATO WGIR-10
WATO WGIR-R-10
威托WATO WQV-06型流量控制閥WATO WQV-06
威托WATO WDR型單向閥
WATO WDR-06
WATO WDR-10WATO WDR-15WATO WDR-25
威托wato WHMP，WKM型疊加式溢流閥 
WATO WHMP-011/210 
WATO WKM-012/210 WATO WHMP-012 WATO WHMP-013 WATO WHMP-014 
WATO WHMP-015 
WATO WKM-011 WATO WKM-013 WATO WKM-014 WATO WKM-015威托wato WHG，WKG型疊加式減壓閥 
WATO WHG-031/210 WATO WHG-033 
WATO WHG-034 
WATO WKG-031 WATO WKG-033 WATO WKG-034 威托wato WHQ，WKQ，WJPQ型疊加式單向節流閥 
WATO WHQ-012 
WATO WHQ-013 
WATO WHQ-014 WATO WHQ-022 WATO WHQ-023 WATO WHQ-024 WATO WKQ-012 WATO WKQ-013 
WATO WKQ-014 
WATO WKQ-022 WATO WKQ-023 WATO WKQ-024 WATO WJPQ-212 WATO WJPQ-213 WATO 
WJPQ-214 WATO WJPQ-222 WATO WJPQ-223 WATO WJPQ-224 
威托wato WHR，WKR，WJPR型疊加式單向閥
WHR-011 
WHR-012 WHR-013 WHR-014 WHR-016 WKR-011 WKR-012 WKR-013 WKR-014 WKR-016
WJPR-212 WJPR-213 WJPR-214 WJPR-312 WJPR-313 WJPR-314 
威托wato WDHE型,WDKE型電磁方向控制閥 
WDHE-0631/2 WDHE-0671/2WDHE-0631/2 WDHE-0711/2 WDHE-0751/2 WDHE-0714WDHE-0639
威托wato WDKE型電磁方向控制閥 
WDKE-1611/2 
WDKE-1630/2
WDKE-1670/2
WDKE-1710/2 WDKE-1751/2 WDKE-1714
威托WATO WDPHE型先導式電液換向閥

 電磁閥分別安裝在主閥的進油回路和出油回路中，用于控制主閥的動作，當兩電磁閥通電時，進油孔（上游閥）回路關閉，先導孔（下游閥）回路打開，活塞上腔泄壓，活塞上行，主閥打開。反之，活塞下行，主閥關閉。在主閥開啟和關閉過程中，可將流量（流速）信號及閥塞位置信號傳送給計算機，經過計算機處理后發出相應的指令，控制兩個電磁導閥的通、斷電狀態，使活塞的上下腔的液壓差產生變化，從而將活塞控制在所需的開啟度上，實現對管道介質流量的控制。

WKM-013,
WKM-014,
WKM-015, 
WGAM-10,
WGAM-20,
WGAM-30 
WHG-031,
WHG-033,
WHG-034 
WKG-031,
WKG-033,
WKG-034 
WHQ-012,
WHQ-013,
WHQ-014,
WHQ-022,
WHQ-023,
WHQ-024,
WKQ-012,
WKQ-014,
WKQ-022,
WKQ-023,
WKQ-024,
WHR-011,
WHR-016,
WHR-007,
WHR-008,
WHR-003,
WHR-004,
WHR-002,
WHR-009,
WKR-011,
WKR-016,
WKR-007,
WKR-008,
WKR-003,
WKR-004,
WKR-002,
WKR-009,
WJPR-211,
WJPR-203,
WJPR-204,
WJPR-202,
WJPR-216,
WJPR-207,
WJPR-208,
WJPR-209,
WJPR-212,