您好, 歡迎來到化工儀器網
7
產品簡介
詳細介紹
化學芯片開封機 Injector 7400
The I53 Injector 7400 is used to introduce low volumes of a solution into the acid stream of Elite Etch decapsulators. This solution is designed to create a more effective etching process and to prevent metal loss with samples that have silver alloy wires
The solution to silver wire decapsulation
The I53 Injector contains a 250 ml source bottle with double containment and leak detection. A single, small diameter, PTFE tube transfers the solution to the Elite Etch system. An injector block installed between the pump and heat exchanger of the Elite Etch and injects the solution into the acid stream. All components are PTFE, PCTFE, or borosilicate glass.
On an existing Elite Etch system, the I53 Injector can be easily installed using a new cable connected from the I53 to the Elite Etch. The existing handheld is now directly plugged into the I53 and does not require any special software for the etcher. The only modification to the etcher is the installation of the injector block and the routing of the solution tubing through the bottle box and into the I53.
When solution injection is selected from the handheld a set up cycle is initiated. This cycle fills the syringe pump and all of the tubing to, and including, the injector block. This cycle purges any excess solution to the waste bottle and prepares for etching with corrosion inhibiting solutions.
The injection of the inhibitor is initiated by selecting the appropriate operation recipe. The programming screen has a selection of the ratio with a range of 20:1 to 40:1. The injection ratio programmed applies to both etching and rinse. The syringe contains approximately 5 ml and the syringe and syringe plunger are easily replicable.
Specifications
| Dimensions | Height: 230 mm (9 in) |
|---|---|
| Width: 230 mm (9 in) | |
| Depth: 127 mm (5 in) | |
| Weight | Approx. 16 kg (35 lb) |
| Power Source | 90 to 250 VAC, 50 to 60 Hz (4 amp) |
| Syringe Type | Hamilton gas tight 5 ml capacity |
| Resolution | 0.1323 μl |
| Cycle Volume | 0.0025 to 0.005 ml programmable |
| Mix Ratio | 20:1 to 40:1 |
| Dispense Accuracy | ±3%, ±0.14 μl |
| Refill Cycle Time | 60 second maximum |
| Source Bottle Size | 250 ml |
| Compatibilities | Elite Etch 7000 |
| Elite Etch Cu 7100 | |
| Elite Etch Cu ESD 7200 | |
| Mega Etch 7300 | |
| Warranty | most comprehensive and inclusive warranty in industry (ask for full details) |
似空科學儀器（上海）有限公司是一家儀器設備的經銷商。我們致力于為中國制造業和研發機構提供高精度、符合人體工學設計的儀器設備。我們也夢想有朝一日，能夠充分掌握市場需求，深刻理解儀器設備的技術原理，聚集一批有激情、有理想、有技術的人，為中國的制造業升級以及中國科研走向世界1流水平，提供自有知識產權的良好儀器設備！
儀器設備發展的極zhi是探測手段和傳感器不對被測目標產生任何干擾，企業管理的極zhi是一切以市場為核心，不以自我的意愿抗拒市場的趨勢，代替客戶的喜好，于是我們取名“似空”，希望以忘我的精神服務客戶。