*bender+wirth燈座銷售

北京歐泰能科技有限公司優勢品牌包括 Siemens 6ES5, 6ES7, 6AV, 6GK, 6EP 系列 Siemens 6DD系列、heidenhain編碼器,光柵尺、Schneider 開關、Hawe閥門、Pepperl-Fuchs（p+f倍加福）、Parker、Turck 、Phonix Contact、Murr Elektronik、IFM electronic、E+H( Endress+Hauser)、Rohm 、Beckhoff、ABB、Festo、Sick、Omron、Harting 開關、emecanique、ETA、Danfoss、Rohm、Hydac、Wenglor、SKF、Schmersal、Rittal、Sommer Automatic、Pilz、 Norgren、MTS、Hahn+Kolb、Leuze、TR Electronic、Moog、 Norgren、 Mahle、Honeywell、Weidmuller 、Kistler、 Camozzi、INA、Weidmuller、 Walther Praezision、Wago、Rechner、Rockwell Automation、Renishaw、Pall、ebmpapst、Moller、Lapp Kabel、lenze、Bürkert、Balluff、REXROTH等 對于不太容易找到的德國及歐美小品牌的工業產品，我們可以幫助您尋找并代為采購，為本公司直接供貨的歐美大中小企業已達1000余家。
北京歐泰能科技有限公司
:
：
：
：

catalog no.	bases	memo	ratings
800	PGJ5	Ceramic Lampholder With its new lampholder-variant '800 high' and the standard-lampholder 869, B+W introduces compatible lampholders for lamp types PGJ5 and GU6.5. Both lampholders measure the same external diameter, provide an identical foot print and position the light centre of the lamp at exactly the same height. This compatibility feature allows using either lamp type in identical optical units without any mechanical modifications.	rated voltage: 250 V rated current: 2 A rated temperature: T350 category: II ignition voltage: 2.5 kV shock protection: enclosed insulation: reinforced insulation
drawing

831	PGJ5	Ceramic Lampholder This lampholder has been developed in conjunction with Philips to form a unique system. With the 831 lampholder it is now possible to retrofit an existing low voltage luminaire with a HID lamp without a complete redesign. All that is needed is an earth terminal for protection purposes.	rated voltage: 250 V rated current: 2 A rated temperature: T350 category: II ignition voltage: 2.5 kV shock protection: unenclosed insulation: basic insulation
drawing

871	GX10	Ceramic Lampholder For HID lamps with 50mm mirror. Lampholder with patented "twist-and-pull contact". Wire routing is possible to one side, both sides or to the back.	rated voltage: 250 V rated current: 6 A rated temperature: T350 category: II ignition voltage: 5 kV shock protection: enclosed insulation: reinforced insulation
drawing

catalog no.	bases	memo	ratings
946	RX7s	Metal Lampholder Distance of mounting surface = length of lamp + 17 mm	rated voltage: 1000 V rated current: 20 A rated temperature: T350 category: II ignition voltage: 5 kV shock protection: enclosed insulation: basic insulation
drawing

946	RX7s	Metal Lampholder Distance of mounting surface = length of lamp + 65 mm	rated voltage: 1000 V rated current: 20 A rated temperature: T350 category: II ignition voltage: 5 kV shock protection: enclosed insulation: basic insulation
drawing

939	RX7s	Ceramic Lampholder Distance of mounting holes = length of lamp + 4 mm or lamplength + 26.5 mm	rated voltage: 1000 V rated current: 10 A rated temperature: T250 category: III ignition voltage: 15 kV shock protection: enclosed insulation: basic insulation
drawing

952	R7s	Aluminum Lampholder Distance of mounting planes = length of lamp + 53.5 mm	rated voltage: 250 V rated current: 10 A rated temperature: T250 category: II shock protection: enclosed insulation: reinforced insulation
drawing

953	R7s	Aluminum Lampholder Distance of mounting points = length of lamp - 11.5 mm	rated voltage: 250 V rated current: 10 A rated temperature: T250 category: II shock protection: enclosed insulation: reinforced insulation
drawing

947	R7s	Ceramic Lampholder Distance of mounting planes = length of lamp - 25.5 mm Accessories: Mounting bars are also with preassembled lampholders available for the following lamp lengths: 74.9 mm 114.2 mm	rated voltage: 250 V rated current: 8 A rated temperature: T200 category: II ignition voltage: 8 kV shock protection: unenclosed insulation: reinforced insulation
drawing

947H	R7s	Ceramic Lampholder Distance of mounting planes = length of lamp - 25.5 mm This Lampholder positions the lamp on a higher level and provides ample space for the pinch of the 150W HID. Accessories: Mounting bars are also with preassembled lampholders available for the following lamp lengths: 74.9 mm 114.2 mm

catalog no.	bases	memo	ratings
959	G12	Ceramic Lampholder Wire routing is possible to one side or to the back.	rated voltage: 500 V rated current: 10 A rated temperature: T350 category: II ignition voltage: 5 kV shock protection: enclosed insulation: reinforced insulation
drawing

946	RX7s	Metal Lampholder Distance of mounting surface = length of lamp + 65 mm	rated voltage: 1000 V rated current: 20 A rated temperature: T350 category: II ignition voltage: 5 kV shock protection: enclosed insulation: basic insulation
drawing

946	RX7s	Metal Lampholder Distance of mounting surface = length of lamp + 17 mm	rated voltage: 1000 V rated current: 20 A rated temperature: T350 category: II ignition voltage: 5 kV shock protection: enclosed insulation: basic insulation
drawing

939	RX7s	Ceramic Lampholder Distance of mounting holes = length of lamp + 4 mm or lamplength + 26.5 mm	rated voltage: 1000 V rated current: 10 A rated temperature: T250 category: III ignition voltage: 15 kV shock protection: enclosed insulation: basic insulation
drawing

952	R7s	Aluminum Lampholder Distance of mounting planes = length of lamp + 53.5 mm	rated voltage: 250 V rated current: 10 A rated temperature: T250 category: II shock protection: enclosed insulation: reinforced insulation
drawing

953	R7s	Aluminum Lampholder Distance of mounting points = length of lamp - 11.5 mm	rated voltage: 250 V rated current: 10 A rated temperature: T250 category: II shock protection: enclosed insulation: reinforced insulation
drawing

947	R7s	Ceramic Lampholder Distance of mounting planes = length of lamp - 25.5 mm Accessories: Mounting bars are also with preassembled lampholders available for the following lamp lengths: 74.9 mm 114.2 mm	rated voltage: 250 V rated current: 8 A rated temperature: T200 category: II ignition voltage: 8 kV shock protection: unenclosed insulation: reinforced insulation
drawing

947H	R7s	Ceramic Lampholder Distance of mounting planes = length of lamp - 25.5 mm This Lampholder positions the lamp on a higher level and provides ample space for the pinch of the 150W HID. Accessories: Mounting bars are also with preassembled lampholders available for the following lamp lengths: 74.9 mm 114.2 mm	rated voltage: 250 V rated current: 8 A rated temperature: T200 category: II ignition voltage: 8 kV shock protection: unenclosed insulation: reinforced insulation
drawing

834	G9	Ceramic Lampholder With flange for horizontal mounting.	rated voltage: 250 V rated current: 0.5 A rated temperature: T250 category: II shock protection: enclosed insulation: reinforced insulation
drawing

834	G9	Ceramic Lampholder With bracket for vertical mounting.	rated voltage: 250 V rated current: 0.5 A rated temperature: T250 shock protection: enclosed insulation: reinforced insulation
drawing

934	PGZ18	Ceramic Lampholder for Philips CDM Elite MW lamp This compact lampholder uses the patented "twist-and-pull contact". Wire routing is possible to the side or to the back. Variant Variant with pillar terminal available.	rated voltage: 500 V rated current: 10 A rated temperature: T350 category: III ignition voltage: 5 kV, >30kHz shock protection: enclosed insulation: reinforced insulation
drawing

935	PGZX18	Ceramic Lampholder for protected lamp This compact lampholder uses the patented "twist-and-pull contact". Wire routing is possible to the side or to the back. Variant Variant with pillar terminal available.	rated voltage: 500 V rated current: 10 A rated temperature: T350 category: III ignition voltage: 5 kV, >30kHz shock protection: enclosed insulation: reinforced insulation
drawing

945	PGZ12	Ceramic Lampholder with Flange This lampholder extends the LCL, therefore it perfectly suits retrofit situations. Wire routing is possible to one side, both sides or to the back.	rated voltage: 250 V rated current: 10 A rated temperature: T350 category: III ignition voltage: 5 kV shock protection: enclosed insulation: reinforced insulation
drawing

945	PGZ12	Ceramic Lampholder for Philips Cosmopolis lamp This compact lampholder uses the patented twist-and-pull contact. Wire routing to one side, both sides or to the back possible.	rated voltage: 250 V rated current: 10 A rated temperature: T350 category: III ignition voltage: 5 kV shock protection: enclosed insulation: reinforced insulation
drawing

800	PGJ5	Ceramic Lampholder With its new lampholder-variant '800 high' and the standard-lampholder 869, B+W introduces compatible lampholders for lamp types PGJ5 and GU6.5. Both lampholders measure the same external diameter, provide an identical foot print and position the light centre of the lamp at exactly the same height. This compatibility feature allows using either lamp type in identical optical units without any mechanical modifications.	rated voltage: 250 V rated current: 2 A rated temperature: T350 category: II ignition voltage: 2.5 kV shock protection: enclosed insulation: reinforced insulation
drawing

831	PGJ5	Ceramic Lampholder This lampholder has been developed in conjunction with Philips to form a unique system. With the 831 lampholder it is now possible to retrofit an existing low voltage luminaire with a HID lamp without a complete redesign. All that is needed is an earth terminal for protection purposes.	rated voltage: 250 V rated current: 2 A rated temperature: T350 category: II ignition voltage: 2.5 kV shock protection: unenclosed insulation: basic insulation
drawing

857	G8.5	Ceramic Lampholder Cable ducting allows wire routing to one side, both sides or to the back. Variant: With covered mounting holes to prevent wrong insertion. Fixing can only be done from the back side.	rated voltage: 500 V rated current: 10 A rated temperature: T350 category: II ignition voltage: 5 kV shock protection: enclosed insulation: basic insulation
drawing

847	GX10	Ceramic Lampholder For HID lamps with 50mm mirror. Please use plastic insulation cap or additional clearance is required, see mounting information.	rated voltage: 500 V rated current: 2 A rated temperature: T350 category: II ignition voltage: 5 kV shock protection: unenclosed insulation: basic insulation
drawing

871	GX10	Ceramic Lampholder For HID lamps with 50mm mirror. Lampholder with patented "twist-and-pull contact". Wire routing is possible to one side, both sides or to the back.	rated voltage: 250 V rated current: 6 A rated temperature: T350 category: II ignition voltage: 5 kV shock protection: enclosed insulation: reinforced insulation
drawing

844	GZ10	Ceramic Lampholder For line-voltage mirror lamps 50mm Lampholder with patented "twist-and-pull contact". Variant: Vertical leads available, please mention with order. Accessories: Plastic cap for protection class II applications

catalog no.	bases	memo	ratings
420	LED	420 LED Wire-to-Board-Feeder The miniature layout of the LED Connector Series 420 from Bender + Wirth ensures shadow-less light and plenty of space for optical components. All elements are potting-compatible. The feeder 420 have a welded connection between wire and connector which creates a very robust and low resistance connection. The top-side assembly improves the module temperature management and simplifies maintenance operations.	rated voltage: 50VAC / 120VDC rated current: 5 A (20°C) rated temperature: -50°C / +100 C
drawing

421	LED	421 LED Board-to-Board-Connector The miniature layout of the LED Connector Series 420 from Bender + Wirth ensures shadow-less light and plenty of space for optical components. All elements are potting-compatible. Due to the small dimensions, the connectors 421 maintain the catch between the LED´s even with small distances. The top-side assembly improves the module temperature management and simplifies maintenance operations.	rated voltage: 50VAC / 120VDC rated current: 5 A (20°C) rated temperature: -50°C / +100 C
drawing

423	LED	423 SMD-Pins The miniature layout of the LED Connector Series 420 from Bender + Wirth ensures shadow-less light and plenty of space for optical components. All elements are potting-compatible. The short SMD Pins 423 are packed in a blister and spooled on a reel. Therefore, they are suitable for automated SMD installation.
drawing

424	LED	424 HV-Wire-to-Board-Feeder The miniature layout of the LED Connector Series 420 from Bender + Wirth ensures shadow-less light and plenty of space for optical components. All elements are potting-compatible. The feeder 424 have a welded connection between wire and connector which creates a very robust and low resistance connection. A special designed sleeve protects the sensitive connection area of the feeder 424. The top-side assembly improves the module temperature management and simplifies maintenance operations.	rated voltage: 250VAC / 450VDC rated current: 5 A (20°C) rated temperature: -50°C / +100 C
drawing

425	LED	425 HV-Board-to-Board-Connector The miniature layout of the LED Connector Series 420 from Bender + Wirth ensures shadow-less light and plenty of space for optical components. All elements are potting-compatible. Due to the small dimensions, the connectors 425 maintain the catch between the LED´s even with small distances. The high voltage version 425 allows a safe connection up to 250V AC / 450V DC (with transient overvoltages up to 4kV). The top-side assembly improves the module temperature management and simplifies maintenance operations.	rated voltage: 250VAC / 450VDC rated current: 5 A (20°C) rated temperature: -50°C / +100°C
drawing

410	R13	Plastic lampholder This lampholder was designed for the Philips OLED modules. The feeder is installed at the ends of each OLED series.	rated voltage: 32 V DC rated current: 1 A rated temperature: T100 category: II shock protection: unenclosed
drawing

411	R13	Plastic Lampholder This lampholder was designed for the Philips OLED modules. The coupler is installed between the OLEDs of a series.	rated voltage: 32 V DC rated current: 1 A rated temperature: T100 category: II shock protection: unenclosed insulation: basic insulation
drawing

985	GY9.5 GZ9.5	Ceramic Lampholder The patented, very robust 4-Line-Contact is designed for high wattages and an extended lamp life. The free floating configuration provides excellent tolerance compensation. Variants with one rigid plate.	rated voltage: 500 V rated current: 20 A rated temperature: T350 category: II ignition voltage: 5 kV shock protection: unenclosed insulation: basic insulation
drawing

931	GZX9.5	Ceramic Lampholder for 125 watt lamps This lampholder is suitable for hot restrike. Please take into account that according to IEC 61347-2-1 the actual peak voltage of ignitors may be 30% above their nominal values.	rated voltage: 500 V rated current: 10 A rated temperature: T250 category: III ignition voltage: max. 25 kV shock protection: enclosed insulation: reinforced insulation
drawing

998	GZY9.5	Ceramic Lampholder for 200 watt lamps This lampholder is suitable for hot restrike. Please take into account that according to IEC 61347-2-1 the actual peak voltage of ignitors may be 30% above their nominal values.	rated voltage: 500 V rated current: 10 A rated temperature: T250 category: III ignition voltage: max. 25 kV shock protection: enclosed insulation: reinforced insulation
drawing

930	GZZ9.5	Ceramic Lampholder for 400 watt lamps This lampholder is suitable for hot restrike. Please take into account that according to IEC 61347-2-1 the actual peak voltage of ignitors may be 30% above their nominal values.	rated voltage: 500 V rated current: 10 A rated temperature: T250 category: III ignition voltage: max. 25 kV shock protection: enclosed insulation: reinforced insulation
drawing

925	GX16d	Ceramic Connector This connector is also available with a jacketed cable and double insulated wires, which may be touched by hand during operation.	rated voltage: 250 V rated current: 16 A rated temperature: T350 category: II ignition voltage: 5 kV shock protection: enclosed insulation: reinforced insulation
drawing

833	G22	Ceramic Lampholder This lampholder is suitable for hot restrike. Please take into account that according to IEC 61347-2-1 the actual peak voltage of ignitors may be 30% above their nominal values.	rated voltage: 500 V rated current: 20 A rated temperature: T350 category: II ignition voltage: max. 25 kV shock protection: unenclosed insulation: reinforced insulation
drawing

832	GY22	Ceramic Lampholder This lampholder is suitable for hot restrike. Please take into account that according to IEC 61347-2-1 the actual peak voltage of ignitors may be 30% above their nominal values.	rated voltage: 500 V rated current: 20 A rated temperature: T350 category: II ignition voltage: max. 25 kV shock protection: unenclosed insulation: reinforced insulation
drawing

938	G38	Ceramic Lampholder for hot restrike For asymmetrical pulse voltages above 18 kV an insulating plate under the lampholder is required. This lampholder is suitable for hot restrike. Please take into account that according to IEC 61347-2-1 the actual peak voltage of ignitors may be 30% above their nominal values.	rated voltage: 1000 V rated current: 40 A rated temperature: T250 category: III ignition voltage: max. 45 kV shock protection: unenclosed insulation: reinforced insulation
drawing

951	SFc10-4	Ceramic Lampholder This lampholder is suitable for hot restrike. Please take into account that according to IEC 61347-2-1 the actual peak voltage of ignitors may be 30% above their nominal values.	rated voltage: 1000 V rated current: 14 A rated temperature: T250 category: III ignition voltage: max. 23 kV shock protection: unenclosed insulation: basic insulation
drawing

827	PGJX36	Ceramic Lampholder The PGJX36 base is the newest version of the Philips FastFit line. The concerted design effort of lamp and socket created an unique system with incredible accuracy. The high tolerances of the ceramic cap and the ceramic body of the lampholder do not affect the mechanical precision of the system. new: rated current 22 A	rated voltage: 250 V rated current: 22 A rated temperature: T350 category: II ignition voltage: 5 kV / 10 kV shock protection: enclosed insulation: reinforced insulation
drawing

829	PGJX28	Ceramic Lampholder Philips and Bender + Wirth developed the FastFit System to allow an easy and fast lamp replacement from the back side of the spotlight. new: rated current 22 A	rated voltage: 250 V rated current: 22 A rated temperature: T350 category: II ignition voltage: 5 kV / 10 kV shock protection: enclosed insulation: reinforced insulation
drawing

839	PGJ50 PGJX50	Ceramic Lampholder For Fast Fit lamps Variants Version with welded wire available. An optional centring ring on the back side of the lampholder prevents misalignment of the lamp during transportation of the spot light. new: rated current 30 A	rated voltage: 250 V rated current: 30 A rated temperature: T350 ignition voltage: 5 kV / 10 kV shock protection: enclosed insulation: reinforced insulation
drawing

969	HPL	Ceramic Lampholder for ETC spot The welded wires of the Bender + Wirth lampholder create less heat than the usual HPL lampholder in which the wire is crimped to the contacts. The reduced heat prevents a premature lamp failure and the burn down of the contacts of the lampholder.	rated voltage: 250 V rated current: 16 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

968	G9.5	Ceramic Lampholder The unique design and material combination of the free floating contacts reduces the generation of thermal energy and is designed to accept extrem tolerances of the lamp pins.	rated voltage: 250 V rated current: 12.5 A rated temperature: T350 category: II shock protection: enclosed insulation: basic insulation
drawing

837	G9.5	Aluminumlampholder with heat sink This lampholder has been developed for extreme temperature conditions. Its specially designed aluminium housing, high performance contacts and leads enable reliable operation at continuous temperatures up to 350°C. Will be replaced by 968	rated voltage: 250 V rated current: 16 A rated temperature: T350 shock protection: enclosed insulation: basic insulation
drawing

995	GX9.5	Metall Lampholder	rated voltage: 500 V rated current: 20 A rated temperature: T250 category: II ignition voltage: 5 kV shock protection: unenclosed insulation: basic insulation
drawing

996	GY16	Metall Lampholder	rated voltage: 500 V rated current: 20 A rated temperature: T250 category: II ignition voltage: 5 kV shock protection: unenclosed insulation: basic insulation
drawing

997	GY9.5 GZ9.5	Ceramice Lampholder Standardversion with two retention springs and ejector Variants Version without ejector Version with one rigid plate and without ejector	rated voltage: 500 V rated current: 10 A rated temperature: T250 category: II ignition voltage: 4 kV shock protection: unenclosed insulation: basic insulation
drawing

999	GY9.5 GZ9.5	Ceramic Lampholder Variants without retention spring	rated voltage: 500 V rated current: 10 A rated temperature: T350 category: II ignition voltage: 6 kV shock protection: unenclosed insulation: reinforced insulation
drawing

814	G4 GY4 GZ4 GX5.3 G6.35 GY6.35 GZ6.35	Universal lampholder for MR11 / MR16 and G6.35 lamps This lampholder can be used with almost all common low voltage lamps. The electric connection is made by the patented, wireless contact through the mounting screws.	rated voltage: 24 V rated current: 10 A rated temperature: T350 category: II shock protection: unenclosed
drawing

815	G4 GY4 GZ4 GX5.3 G6.35 GY6.35 GZ6.35	Universal lampholder for MR11 / MR16 and G6.35 lamps This lampholder can be used with almost all common low voltage lamps. One electric connection is made by the patented, wireless contact through the mounting screw, the other contact is made by using a standard wire.	rated voltage: 24 V rated current: 10 A rated temperature: T350 category: II shock protection: unenclosed
drawing

994	G4 GY4 GZ4	Standard lampholder	rated voltage: 250 V rated current: 10 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

958	G4 GY4 GZ4	Lampholder Lateral wire routing possible.	rated voltage: 250 V rated current: 10 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

990	G4 GY4 GZ4	Lampholder with side contact In order to allow a close postitioning of the lamp to the reflector, the contact is located at the edge of the lampholder.	rated voltage: 50 V rated current: 10 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

971	G4 GY4 GZ4	Lampholder with middle contact	rated voltage: 250 V rated current: 6 A rated temperature: T250 category: II shock protection: unenclosed insulation: basic insulation
drawing

973	G4	Miniature lampholder With recess or slot for clip fixing available. With lateral wire routing for reduced height available.	rated voltage: 24 V rated current: 4 A rated temperature: T180 category: II shock protection: unenclosed insulation: basic insulation
drawing

993	G4	Miniature lampholder with heat sink With and without heat sink available. With lateral wire routing for reduced height available.	rated voltage: 24 V rated current: 4 A rated temperature: T180 category: II shock protection: unenclosed insulation: basic insulation
drawing

979	GU4	Standard lampholder Even with high tolerances of the lamp cap, the slotted retention spring provides a safe and secure lamp fit.	rated voltage: 24 V rated current: 10 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

989	G3.9 GX5.3	Standard lampholder Also usable for mirror lamps G3.9	rated voltage: 250 V rated current: 12.5 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

872	GX5.3	Special lampholder for MR16 One electric connection of the lampholder is made by the patented, wireless contact through the mounting screws, the other contact is made by using a standar wire. The contacts are calibrated to the thinner pins of the MR16 lamps andprovide a very accurate lamp positioning.	rated voltage: 24 V rated current: 12.5 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

812	GX5.3 GY6.35	Lampholder (GY6.35) / Connector (GX5.3) With recessed mounting holes.	rated voltage: 50 V rated current: 12.5 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

961	GX5.3 GY6.35	Lampholder (GY6.35) / Connector (GX5.3) Lateral wire routing possible.	rated voltage: 250 V rated current: 12.5 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

884	G5.3 GX5.3	Lampholder with Three-Line-Contact The Three-Line-Contact provides an excellent electrical and mechanical contact even under problematic conditions. The free floating configuration of the contacs compensates very high tolerances of the lamp pins. Lateral leads possible, please mention with order.	rated voltage: 250 V rated current: 12.5 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

866	GX5.3	Lampholder for insertion from the side Catalog number 866R for lever right Catalog number 866L for lever left) (in direction of projection) Variant Without lever available.	rated voltage: 250 V rated current: 10 A rated temperature: T250 category: II shock protection: enclosed insulation: basic insulation
drawing

875	GX5.3 GY6.35	Lampholder (GY6.35) / Connector (GX5.3) With screw terminal. Variant with welded connection leads available.	rated voltage: 50 V rated current: 10 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

870	GU5.3	Standard lampholder Even with high tolerances of the lamp cap, the slotted retention spring provides a safe and secure lamp fit.	rated voltage: 250 V rated current: 12.5 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

850	GU5.3	Special lampholder with heavy duty contact This lampholder will be replaced by lampholder 870.	rated voltage: 24 V rated current: 12.5 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

851	GU5.3	Special lampholder with heavy duty contact This lampholder will be replaced by lampholder 870.	rated voltage: 24 V rated current: 12.5 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

855	GU5.3	Special lampholder with retention spring for MR16 The electric connection is made by the wireless contact by means of current carrying bars or M3 fixing screws. The barrs can be connected axial or lateral. The mounting holes can be a 3mm hole, a M3 thread or equiped with a hex screw M3.	rated voltage: 24 V rated current: 5 A rated temperature: T200 category: II shock protection: unenclosed
drawing

912	G6.35 GY6.35 GZ6.35	Standard lampholder Also usable for lamps GX6.35	rated voltage: 250 V rated current: 12.5 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

913	G6.35 GY6.35 GZ6.35	Special lampholder G6.35 Like lampholder 814, the electric connection is made by the patented, wireless contacts through the mounting screws. The contacts are calibrated to the pin-diameter of the G6.35; GY6.35; GZ6.35 series lamps and provide a very acurate lamp positioning.	rated voltage: 24 V rated current: 12.5 A rated temperature: T350 category: II shock protection: unenclosed
drawing

920	G6.35 GY6.35 GZ6.35	Lampholder with middle contact Also usable for lamps GX6.35	rated voltage: 250 V rated current: 10 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

864	G6.35 GY6.35 GZ6.35	Lampholder with side contact In order to allow a close postitioning of the lamp to the reflector, the contact is located at the edge of the lampholder. Also usable for lamps GX6.35	rated voltage: 250 V rated current: 12.5 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

901	G6.35 GY6.35 GZ6.35	Lampholder Also usable for lamps GX6.35	rated voltage: 250 V rated current: 12.5 A rated temperature: T350 category: II shock protection: unenclosed insulation: basic insulation
drawing

902	G6.35 GY6.35	Lampholder Also with temperature rating T200 available. Variant For lamps G6.35 please use catalogue number 902 /1Ag,	rated voltage: 24 V rated current: 10 A rated temperature: T180 shock protection: unenclosed insulation: basic insulation
drawing

865	GZ6.35	Lampholder for insertion from the side Catalog number 865R for lever right Catalog number 865L for lever left) (in direction of projection) Variant Without lever available.	rated voltage: 250 V rated current: 10 A rated temperature: T250 category: II shock protection: enclosed insulation: basic insulation
drawing

830	special	Acessory Lampholder carrier for the rapid-exchange of lampholders 814, 848, 852, 873, 913, 983	rated voltage: 24 V rated current: 12.5 A rated temperature: T250 category: II shock protection: unenclosed insulation: basic insulation
drawing

860	GX5.3 GY5.3 GZ6.35	Acessory Holder for open dichroic reflector lamps with 50mm mirror.
drawing

108n	LED	LED holder 4xx Typ A1 the optimal connection between the different COBs (see data sheet) and the Almeco reflector 108n. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

108w	LED	LED holder 4xx Typ A1 the optimal connection between the different COBs (see data sheet) and the Almeco reflector 108w. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

DKL-SQ120	LED	LED holder 4xx Typ A1 the optimal connection between the different COBs (see data sheet) and the Almeco reflector DKL-SQ120. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

DKL97	LED	LED holder 4xx Typ A1 the optimal connection between the different COBs (see data sheet) and the Almeco reflector DKL97. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

DKL194	LED	LED holder 4xx Typ A1 the optimal connection between the different COBs (see data sheet) and the Almeco reflector DKL194. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Newton	LED	LED holder 4xx Typ L1, L2, L3 the optimal connection between the different COBs (see data sheet) and the Carclo reflector series using the Carclo Adapter Newton. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

26,5 TIR	LED	LED holder 4xx Typ C2, C3 the optimal connection between the different COBs (see data sheet) and the Carclo lense family 26,5mm TIR. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature

catalog no.	bases	memo	ratings
LLC66	LED	LED holder 4xx Typ Z1 the optimal connection between the different COBs (see data sheet) and the Gaggione lenseholder LLC66. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

LLR01N	LED	LED holder 4xx Typ G1 the optimal connection between the different COBs (see data sheet) and the Gaggione reflector Ø45 AF. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

LLR05N	LED	LED holder 4xx Typ G2 the optimal connection between the different COBs (see data sheet) and the Gaggione reflector Ø70 AF. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature:

catalog no.	bases	memo	ratings
Cosmo	LED	LED holder 4xx Typ K3, Z1 the optimal connection between the different COBs (see data sheet) and the Khatod lenses PLL208, PLL2009 und PLL2010. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

G3.9

click here for lampholders

HPL

click here for lampholders

G4

click here for lampholders

GX9.5

click here for lampholders

GU4

click here for lampholders

GY9.5

click here for lampholders

GY4

click here for lampholders

GZ9.5

click here for lampholders

GZ4

click here for lampholders

GZX9.5

click here for lampholders

G5.3

click here for lampholders

GZY9.5

click here for lampholders

GU5.3

click here for lampholders

GZZ9.5

click here for lampholders

GX5.3

click here for lampholders

GU10

click here for lampholders

GY5.3

click here for lampholders

GZ10

click here for lampholders

G5.3-4.8

click here for lampholders

GX10

click here for lampholders

G6.35

click here for lampholders

G12

click here for lampholders

GX6.35

click here for lampholders

GX12-1

click here for lampholders

GY6.35

click here for lampholders

GX16d

click here for lampholders

GZ6.35

click here for lampholders

GY16

click here for lampholders

G8.5

click here for lampholders

G22

click here for lampholders

GU6.5

click here for lampholders

GY22

click here for lampholders

GU8.5

click here for lampholders

G38

click here for lampholders

GX8.5

click here for lampholders

PGJ5

click here for lampholders

G9

click here for lampholders

PG12-1

click here for lampholders

G9.5

click here for lampholders

PG12-2

PG12-3 click here for lampholders RX7s click here for lampholders PGX12-1 click here for lampholders SFc10-4 click here for lampholders PGX12-2 click here for lampholders R13 click here for lampholders PGZ12 click here for lampholders B15d click here for lampholders PGZ18 click here for lampholders B15s click here for lampholders PGZX18 click here for lampholders BA20d click here for lampholders P28s click here for lampholders BA20s click here for lampholders PGJX28 click here for lampholders B22d click here for lampholders PGJX36 click here for lampholders BY22d click here for lampholders PGJ50 click here for lampholders special click here for lampholders PGJX50 click here for lampholders LED click here for lampholders R7s click here for lampholders
Easy Assymetric	LED	LED holder 4xx Typ Z2 the optimal connection between the different COBs (see data sheet) and the Khatod reflector series Easy Asymmetric using the Khatod Adapter KLCP1799ST. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Easy	LED	LED holder 4xx Typ Z2, Z3 the optimal connection between the different COBs (see data sheet) and the Khatod reflector series Easy using the Khatod Adapter KLCP18..CR. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

PL50SIL	LED	LED holder 4xx Typ K2 the optimal connection between the different COBs (see data sheet) and the Khatod lense PL50SIL. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

SiO3	LED	LED holder 4xx Typ K1 the optimal connection between the different COBs (see data sheet) and the Khatod lense SiO3. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

SIR50	LED	LED holder 4xx Typ K3 the optimal connection between the different COBs (see data sheet) and the Khatod lense SIR50. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile

catalog no.	bases	memo	ratings
2x2MX	LED	LED holder 4xx Typ 2x2MX HV the optimal mounting of the different COBs (see data sheet) combined with LEDil Strada 2x2MX optics Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 150 V DC rated current: 5 A rated temperature: T 180
drawing

Angela Angelette Angelina	LED	LED holder 4xx Typ L1, L2, L3 the optimal connection between the different COBs (see data sheet) and the Ledil reflector series Angela, Angelette, Angelina using the Ledil Adapter Clamp-VERO. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Barbara	LED	LED holder 4xx Typ L1, L2 the optimel connection between the different COBs (see data sheet) and the Ledil reflector series Barbara using the Ledil Adapter PF-Socket-VERO.	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Brooke	LED	LED holder 4xx Typ L8 is used for an optimal connection between the different COB´s and the BROOKE-G2 reflektor in combination with the Ledil adapter HEKLA needed.	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Lena Lenina	LED	LED holder 4xx Typ L1, L2, L3 the optimal connection between the different COBs (see data sheet) and the Ledil reflector series Lena, Lenina using the Ledil Adapter Lena-STD-BASE-VERO. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Carmen	LED	LED holder 4xx Typ L8 is used for an optimal connection between the different COB´s and the CARMEN-C reflektor in combination with the Ledil adapter HEKLA needed.	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Hekla	LED	LED holder 4xx Typ L8 the optimal connection between the different COBs (see data sheet) and the Ledil Adapter. Suitable for the following optics. > BROOKE-G2 > CARMEN > MIRELLA-G2 > RONDA > WINNIE > ZORYA	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Mirella	LED	LED holder 4xx Typ L1, L2 the optimal connection between the different COBs (see data sheet) and the Ledil reflector series Mirella using the Ledil Adapter PF-Socket-VERO. The adapter HEKLA is required for the connection to the reflektor MIRELLA-G2.	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Molly	LED	LED holder 4xx Typ L1, L2, L3 the optimal connection between the different COBs (see data sheet) and the Ledil lense series Molly using the Ledil Adapter Clamp-VERO. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Olivia	LED	LED holder 4xx Typ Z1 the optimal connection between the different COBs (see data sheet) and the Ledil lens Olivia. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Ronda	LED	LED holder 4xx Typ L1, L2 the optimal connection between the different COBs (see data sheet) and the Ledil lense series Ronda using the Ledil Adapter Clamp-VERO. The adapter HEKLA is required for the connection to RONDA-C.	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Saga	LED	LED holder 4xx Typ L6 the optimal connection between the different COBs (see data sheet) and the Ledil lens Saga. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Sla-A	LED	LED holder 4xx Typ L1 the optimal connection between the different COBs (see data sheet) and the Ledil lens Sla-A. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Sla-DWC2	LED	LED holder 4xx Typ Z1 the optimal connection between the different COBs (see data sheet) and the Ledil lens Sla-DWC2. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Sla-Fresnel	LED	LED holder 4xx Typ L4 the optimal connection between the different COBs (see data sheet) and the Ledil lens Sla-Fresnel. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Sla-HB	LED	LED holder 4xx Typ L4 the optimal connection between the different COBs (see data sheet) and the Ledil lens Sla-HB. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Sla-HB-WWW	LED	LED holder 4xx Typ L4 the optimal connection between the different COBs (see data sheet) and the Ledil lens Sla-HB-WWW. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Sla-T4	LED	LED holder 4xx Typ Z1 the optimal connection between the different COBs (see data sheet) and the Ledil lens Sla-T4. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

Sla-VSM	LED	LED holder 4xx Typ Z1 the optimal connection between the different COBs (see data sheet) and the Ledil lens Sla-VSM. Benefits of the LED holder series 430: > safe contacting of the LED > solid und shape retentive materials > extremely low profile	rated voltage: 80 V DC rated current: 5 A rated temperature: T 180
drawing

LED支架 
燈座銷售

北京歐泰能科技有限公司
:
：
：
：
VS Lighting

VS Lighting DMS120***H 

VS Lighting DMS124***H 

VS Lighting DMS125***H 

VS Lighting DMS126***H 

VS Lighting DMS128***H 

VS Lighting DMS12C***H 

VS Lighting DMS18B***H 

VS Lighting DMS18Q***G 

VS Lighting TW1914 

VS Lighting TW2817 

VS Lighting TW2820

Zhaga

Zhage type Z1 

Zhage C12x15 

Zhage C16x19 

Zhage C19x19 

Zhage C20x24 

Zhage C24x24
Bridgelux
Bridgelux H6 

Bridgelux H9 

Bridgelux H12 
Bridgelux H15 

Bridgelux V6 / V8 

Bridgelux  V10 / V13 
Bridgelux  V15 

Bridgelux  V18 

Bridgelux V22 

Bridgelux V10 Gen7 

Bridgelux V13 Gen7 

BridgeluxV18 Gen7 
Bridgelux V22 Gen7 

Bridgelux DimToWarm 9mm 

Bridgelux DimToWarm 15mm 

Bridgelux Tunable 9mm 

BridgeluxTunable 13mm 

Citizen
 CLL 012 

Citizen CLL 104 

Citizen CLL 166 / 176 

Citizen CLU 03H 

Citizen CLU 04H 

Citizen CLU 05H 

Citizen CLU 024 / 026 / 028 

Citizen CLU 025 / 027 

Citizen CLU 034 / 036 / 038 

Citizen CLU 044 / 046 / 048 

Citizen CLU 054 / 056 / 058 

Citizen CLU 550 

Citizen CLU 700 / 701 

Citizen CLU 710 / 711 

Citizen CLU 720 / 721 

Citizen CLU 730 / 731 

Citizen CLC 020 

Citizen CLC 033 

Citizen LCN C01B / C02B

Cree

Tridonic

Tridonic SLE G6 LES10 

Tridonic SLE G6 LES15 

Tridonic SLE G6 LES17 

Tridonic SLE G6 LES19 

Tridonic SLE G6 LES23 

Tridonic SLE G1 11mm Sunset 

Tridonic SLE G1 15mm Sunset
Cree CXA/B 1304 

Cree CXA/B 1310 

Cree CXA/B 1507 

Cree CXA 1510 

Cree CXA/B 1512 

Cree CXA/B 1520 

Cree CXA/B 1816 

Cree CXA/B 1820 

Cree CXA/B 1830 

Cree CXA 1850 

Cree CXA 2520 

Cree CXA/B 2530 

Cree CXA/B 2540 

Cree CXA 2590 

Cree CXA/B 3050 

Cree CXA/B 3070 

Cree CXA/B 3590
Edison Opto
Edison Opto HM05 / HM09 / HM13 

Edison Opto HM16 / HM24 / HM30 

Edison Opto HM40 

Edison OptoHMA2 / HMA5
Everlight

Everlight XUAN 1313 

Everlight XUAN 1919 
Everlight CHI 2024 

Everlight CHI 3030
Lextar

Lextar PB06H09 

Lextar PB09H01 

Lextar PB13H01 

Lextar PB16H01 

Lextar PB19H01 

Lextar PB26H01 

Lextar PB38H01 
LG Innotek

LG Innotek 7W Small LES COB G2 

LG Innotek 7W / 10W COB G2 

LG Innotek 16W / 21W COB G2 

LG Innotek 32W COB G2 

LG Innotek 42W COB G2 

LG Innotek 56W COB G2 
Lumileds

Lumileds Luxeon 205 / 209 

Lumileds Luxeon 1202s 

Lumileds Luxeon 1202 / 1203 

Lumileds Luxeon 1204 / 1205 

Lumileds Luxeon 1208 

Lumileds Luxeon 1211 

Lumileds Luxeon 1216 / 1812 

Lumileds Luxeon 1321 / 1825
Luminus

Luminus CHMLuminus6LuminusXH / CXMLuminus6LuminusAC 

Luminus CXMLuminus9LuminusAC 

Luminus CHMLuminus9LuminusXD / CXMLuminus9LuminusAA 

Luminus CHMLuminus9LuminusXH 

Luminus CHMLuminus11LuminusXH 

Luminus CXMLuminus11LuminusAC 

Luminus CXMLuminus14LuminusAC 

Luminus CHMLuminus14LuminusXH00 

Luminus CHMLuminus14LuminusXH20 

Luminus CXMLuminus18 

Luminus CXMLuminus22LuminusAC 

Luminus CXMLuminus27 

Luminus CXMLuminus32 

Luminus CDMLuminus6 / CDMLuminus9 

Luminus CDMLuminus14 / CDMLuminus18 

Luminus CTMLuminus9 

Luminus CTMLuminus14 / CTMLuminus18 

Luminus CTMLuminus22 

Nichia