化工儀器網
技術文章
BURKERT膜片閥2033系列采用無縫焊接
閱讀：2281 發布時間：2017-9-1BURKERT膜片閥2033系列用于控制高純度、無菌、侵蝕性或磨損性介質。這種閥門具有很小的死角體積，能夠實現*的容器灌注和排空過程。閥體由一個錠塊構成，該錠塊無焊縫，由不銹鋼制造而成。底部排放閥的法蘭具有兩個斜角。這種結構簡化了其在容器中的定位和焊接過程。高品質的隔膜將臨界性介質與伺服驅動裝置密封分離。通過氣動先導式閥（單個先導式閥、閥島或控制頭），可以控制氣動的伺服驅動裝置。控制功能 A，通過彈簧力在靜止位置關閉。
BURKERT膜片閥2033系列技術參數：
Orifice | DN08 to DN100 |
Body material | Stainless steel 1.4435 acc. to BN2 / ASME BPE |
| Fe < 0.5% / C ≤ 0.03% |
Port connections |
|
Weld end | • DIN EN ISO 1127 / ISO 4200 / DIN 11866 Series B |
| • DIN 11850 Series 2 / DIN 11866 Series A |
| • ASME BPE / DIN 11866 Series C |
Clamp | • DIN 32676 Series A (DIN tube) |
| • DIN 32676 Series B (ISO tube) |
| • ASME BPE |
Surface finish (others on request) | Ra ≤ 0,5 μm (ASME BPE SF1) |
• inside mechanical polished |
|
| (external Ra ≤ 1.6 μm) |
• inside electro polished | Ra ≤ 0,38 μm (ASME BPE SF4 / DIN HE4) |
| (external Ra ≤ 1.6 μm) |
Diaphragm materials | EPDM (AB), PTFE/EPDM (EA) |
| EPDM (AD), advanced PTFE/EPDM (EU) and FKM (FF) |
| on request |
Actuator material | PPS (PA for actuator sizes ø 175/225 mm) |
Medium temperatures |
|
EPDM (AB), PTFE/EPDM (EA) | -10 to +130 °C (steam sterilisation +140 °C for 60 min) |
EPDM (AD), advanced PTFE/ | -5 to +143 °C (steam sterilisation +150 °C for 60 min) |
EPDM (EU) |
|
FKM (FF) | 0 to +130 °C (not recommended for steam) |
Ambient temperature |
|
Actuator size < 100 mm | +5 to +140 °C |
Actuator size ≥ 100 mm | +5 to +90 °C (briefl y up to +140 °C, -10 to +60 °C with PA actuator) |
Control medium | Neutral gases, air |
Pilot pressure max. | max. 7 bar, see table on page 2 |