安捷倫氣相色譜Markes熱脫附配件無論您需要采用大體積進樣功能提高儀器的靈敏度, 分析熱不穩定的化合物，還是分析臟的樣品, 多模式進樣口都能提供您需要的性能和靈活性。
安捷倫氣相色譜Markes熱脫附配件無論您需要采用大體積進樣功能提高儀器的靈敏度, 分析熱不穩定的化合物，還是分析臟的樣品, 多模式進樣口都能提供您需要的性能和靈活性。
安捷倫氣相色譜Markes熱脫附配件
特性
- 我們的進樣口由安捷倫工程師設計、測試并制造，它們與安捷倫的儀器*契合并展現的性能。此外，安捷倫將提供整個系統中您可能需要的任何一個更換部件，并非只提供一小部分部件。
| MKI-U-DISK1 | Filter disk | 5.1 mm | PTFE |
|---|
| MKI-U-DISK3 | Filter disk | 6.3 mm | PTFE |
|---|
| MKI-U-T3ATX-2S | Cold trap | Air toxics (TO-14) | |
|---|
| MKI-U-T15ATA-2S | Cold trap | Air toxics (TO-15/TO-17) | |
|---|
| C-BIO10 | Sampling tube/cap | Bio-VOC | Stainless steel |
|---|
| C-BTX100NG | Chemical standard | BTX, 100 ng | |
|---|
| C-CPLOK | Tool | CapLOK | |
|---|
| C-TBP1CXC | Sorbent tube | Carb X | Stainless steel |
|---|
| C-TBP1C1C | Sorbent tube | Carbograph 1 | Stainless steel |
|---|
| C-AT010C | Sorbent tube | Carbograph 1/ Carboxen 1000 | Stainless steel |
|---|
| C-GAT010C | Sorbent tube | Carbograph 1/ Carboxen 1000 | Glass |
|---|
| MKI-U-T10CW-2S | Cold trap | Chemical weapons | |
|---|
| MKI-UTD-5064 | Tool | Cold trap alignment | |
|---|
| MKI-TC20-FLTR | Filter | Cooling fan | |
|---|
| MKI-U-T13DHS-2S | Cold trap | DHS | |
|---|
| MKI-MTD-1169 | Tube Accessory | DiffLok cap | Stainless steel |
|---|
| MKI-MTD-1204 | Tube Accessory | DiffLok cap | SilcoSteel |
|---|
| MKI-U-COV10 | Tube Accessory | DiffLok cap o-ring | |
|---|
| C-GT010 | Sorbent tube | Empty | Glass |
|---|
| C-TBE10 | Sorbent tube | Empty | Stainless steel |
|---|
| MKI-U-T1KORI | Cold trap | Empty | |
|---|
| MKI-U-T18325-2S | Cold trap | EPA 325 | |
|---|
| MKI-U-T11GPC-2S | Cold trap | General purpose, carbon | |
|---|
| MKI-U-T16GHG-2S | Cold trap | Greenhouse gasses |
|---|
| MKI-U-T1HBL-2S | Cold trap | High boilers, C6 to C40 | | Quantity |
|---|
| C-CHKME10 | Chemical standard | Material emissions | | Quantity |
|---|
| MKI-U-T12ME-2S | Cold trap | Material emissions | | Quantity |
|---|
| C-TBME10 | Sorbent tube | Material emissions | | Quantity |
|---|
| MKI-Z-0351 | Tool | O-ring extraction | | Quantity |
|---|
| MKI-Z-0285 | Tool | O-ring insertion | | Quantity |
|---|
| MKI-U-COV06 | Tube Accessory | O-ring, cold trap, 6 mm | | Quantity |
|---|
| MKI-U-COV07 | Tube Accessory | O-ring, cold trap, 7 mm | | Quantity |
|---|
| MKI-U-T17O3P-2S | Cold trap | Ozone precursors | | Quantity |
|---|
| C-TBTAG10 | Tube accessory | RFID TubeTAG | | Quantity |
|---|
| C-DF010 | Tube cap | Sampling, axial diffusion | Stainless steel | Quantity |
|---|
| MKI-SERUTD-5065 | Filter tube | Split line, Charcoal | Stainless steel |
|---|
|
| C-CF020 | Tube cap | Storage | Brass | Quantity |
|---|
| MKI-U-T6SUL-2S | Cold trap | Sulfer/labile | | Quantity |
|---|
| C-G1CM10 | Sorbent tube | Tenax TA | Glass | Quantity |
|---|
| MKI-U-T9TNX-2S | Cold trap | Tenax TA | | Quantity |
|---|
| MKI-UTD-5105 | Sampling tube/cap | Tenax TA | Stainless steel | Quantity |
|---|
| C-TBP1TC | Sorbent tube | Tenax TA (35/60) | Stainless steel | Quantity |
|---|
| C-TNXTA | Sorbent | Tenax TA (35/60) | | Quantity |
|---|
| G6500-60701 | Trap | Tenax TA (ITEX-2) | | Quantity |
|---|
| C-UN010C | Sorbent tube | Tenax TA/Carbograph 1/Carboxen 1000 | Stainless steel | Quantity |
|---|
| C-HY010C | Sorbent tube | Tenax TA/Carbograph 1 | Stainless steel | Quantity |
|---|
| C-102SSC | Sorbent tube | Tenax/S'carb | Stainless steel | Quantity |
|---|
| MKI-C-QSC10 | Column connector | Transfer line to column
|
|---|
| C-PL010 | Insert | Tube insert | PTFE | Quantity |
|---|
| MKI-UTE-5099 | Transfer line | With PTFE sleeve | Fused silica/PTFE sleeve |
|---|
9
