 | 北京中航時代儀器設備有限公司 |
13699145010
在線溝通：
石磊 （銷售經理）
- 電話：
- 400-166-9267
- 手機：
- 13699145010
- 傳真：
- 86-010-80224846
- 聯系我時，
- 告知來自化工儀器網
- 個性化：
- www.zhonghangyq.com
[供應]GB/T1981.1-2007電氣絕緣用漆板介電擊穿電壓強度試驗機
GB/T1981.1-2007電氣絕緣用漆板介電擊穿電壓強度試驗機
一、概述
采用立式箱體結構，極大的節省試驗室內占地空間，地腳采用滑輪結構，方便移動和擺放，避免同類廠家生產的臥式設備，安放時需要另配安裝臺的情況，占地空間大，移動不方便等缺點。
滿足GB1408.1-2006《絕緣材料電氣強度試驗方法 第1部分；工頻下試驗》、GB/T1695-2005《硫化橡膠工頻擊穿電壓強度和耐電壓的測定方法》、GB/T 3333-1999《電纜紙工頻擊穿電壓試驗方法》、GB/T 12656-1990《電容器紙工頻擊穿電壓測定法》、GB/T1981及ASTM D149標準要求設計制造。
主要適用于固體絕緣材料如：塑料薄膜、樹脂、云母、陶瓷、玻璃、絕緣油、絕緣漆、紙板等介質在工頻電壓或直流電壓下擊穿強度和耐電壓時間的測試；介電強度測試儀采用計算機控制，試驗過程中可在線觀察試驗曲線；自動存儲試驗條件及試驗結果等數據，并可存取、顯示、打印。
二、主要技術要求：
序號 | 項目 | 參數 |
1 | 設備輸入電壓 | 交流 50KV |
2 | 試驗電壓方式 | 交流 0--50 KV ;直流 0--20 KV |
3 | 電器容量 | 10KVA |
4 | 試驗方法 | 0-50KV全量程可調 |
5 | 擊穿及耐壓試驗升壓速率 | 0.1 KV/S-3.0 KV/S可調 |
6 | 試驗方式 | 直流試驗 交流試驗 |
7 | 漏電電流選擇 | 1—100 mA |
8 | 電壓測量誤差 | ≤ 1.5％ |
9 | 試驗電壓連續可調 | 0-100 KV |
10 | 耐壓時間設定 | 0-6小時 |
11 | 九級安全防護措施 | (1) 超壓保護 |
12 | (2)試驗過流保護 | |
13 | (3)試驗短路保護 | |
14 | (4)安全門開啟保護 | |
15 | (5)軟件誤操作保護 | |
16 | (6)零電壓復位保護 | |
17 | (7)試驗結束放電保護 | |
18 | (9)試驗完成后電磁放電 | (8)獨立保護接地 |
三、試驗方式
1、絕緣試樣空氣中擊穿或耐壓試驗
2、絕緣試樣浸油中擊穿或耐壓試驗
3、絕緣試樣空氣中階梯擊穿或耐壓試驗
4、絕緣試樣浸油中階梯擊穿或耐壓試驗
注：根據用戶要求，可定制其他試驗方式
四、試驗軟件：
1、本儀器在試驗過程中可對升壓擊穿過程繪制實時曲線，每次試驗的升壓曲線都由不同顏色構成，試驗結束后可疊加對比材料的試驗數據重復性。
2、可以隨時調取當前及歷史試驗數據進行查看，編輯及修改參數。
3、試驗過程中可以隨時修改試驗條件及存儲路徑及自動存儲試驗結果。
4、試驗過程中，可隨時通過軟件決定本次試驗是否有效，方便篩選試驗結果。
5、可設置操作口令，做到專機專人操作，避免無關人員誤操作。
五、常規型號：
ZJC-10KV
ZJC-20KV
ZJC-50KV
ZJC-100KV
ZJC-150KV
六、主要配置：
序號 | 配置 | 數量 | 單位 |
1 | 試驗主機 | 1 | 臺 |
2 | 5萬伏高壓發生器 | 1 | 臺 |
3 | 全自動微電腦電壓調壓裝置 | 1 | 套 |
4 | 試驗電極 | 2 | 套 |
5 | 試驗用油盒 | 1 | 只 |
6 | 電磁自動放電裝置 | 1 | 套 |
7 | 電壓擊穿計算機測控軟件 | 1 | 套 |
8 | 計算機 | 1 | 套 |
9 | 彩色噴墨打印機 | 1 | 臺 |
10 | *計量鑒定質檢證書 | 1 | 份 |
11 | 產品使用說明書 | 1 | 份 |
12 | 合格證 | 1 | 份 |
七、注意事項：
1、儀器安裝時應具有獨立的接地線。
2、在開機前，操作者要首先熟悉操作方法。
3、儀器不能在有強烈腐蝕性氣體及有顆粒雜質的氣體環境中使用。
4、試驗環境溫度15度到25度之間，相對濕度60％到70％之間
5、試樣擊穿瞬間有火花產生并伴有聲響，屬正常現象。
6、每次更換試樣或接觸高壓電極時必須用高壓放電棒對高壓電極進行放電，放電時間5秒以上。
7、每次進行試驗前，必須檢查儀器接地。
GB/T1981.1-2007電氣絕緣用漆板介電擊穿電壓強度試驗機
By use of a vertical box structure, greatly saves the indoor space occupation anchortest, using the pulley structure, convenient move and put, avoid similar horizontalequipment manufacturers, when placed on the need for distribution, large space occupation, inconvenient shortcomings of .
Meet the GB1408.1-2006 "testing methods for insulating material strength of the first part; power frequency test," GB/T1695-2005 "vulcanized rubber power frequency voltage breakdown strength and voltage resistance determination method," GB/T 3333-1999 "cable paper power frequency breakdown voltage test method," GB/T 12656-1990"paper capacitor power frequency breakdown voltage measurement method",GB/T1981 and ASTM D149 standards design and manufacture.
Mainly applicable to solid insulating materials such as: plastic film, resin, mica, ceramic,glass, insulating oil, insulating paint, paper and other media in the frequency of the voltage or DC voltage breakdown strength and voltage resistance test of time; dielectric strength tester controlled by computer, the test process can be observed online test curve; automatic storage test conditions and test data, and can access, display, print.
The serial number of the project parameter
1 the equipment input AC voltage 50KV
2 test voltage mode AC DC 0--50 KV; 0--20 KV
3 electric capacity 10KVA
0-50KV 4 test method for full range adjustable
The 5 breakdown and voltage withstand test pressure rate 0.1 KV/S-3.0 KV/S adjustable
Test 6 test methods of AC DC test
7 leakage current selection of 1 - 100 mA
8 voltage measurement error is less than or equal to 1.5%
9 test voltage continuously adjustable 0-100 KV
The 10 pressure time setting 0-6 hours
11 level nine security protection measures (1) overpressure protection
12 (2) test overcurrent protection
13 (3) test and short circuit protection
14 (4) safety door opening protection
15 (5) of software protection misoperation
16 (6) zero voltage reset protection
17 (7) over discharge protection test
18 (9) after the test of electromagnetic discharge (8) independent protective earthing
1, insulation breakdown or pressure in the air test specimen
2, insulation breakdown or pressure immersion in the test specimen
The 3 step, the insulation breakdown or pressure in the air test specimen
4, the insulating ladder breakdown or pressure sample immersion in the test
Note: according to the requirements of users, can be customized for other test methods
1, the instrument can boost the breakdown process in real time curve drawing during the test, each test boost curve are composed of different color, after testing can besuperimposed contrast material test data repeatability.
2, can obtain the current and historical test data view, edit and modify the parameters.
3, the test process can modify the test conditions and storage path and automatic storage test results at any time.
4, test process, may at any time through the software determines the test is effective,convenient screening test results.
5, can be set the operation of password, do special person operation, to avoid irrelevant personnel misoperation.
ZJC-10KV
ZJC-20KV
ZJC-50KV
ZJC-100KV
ZJC-150KV
Configuring the serial number of the number of units
1 test machine 1 Taiwan
The 250000 volt high-voltage generator 1
3 automatic microcomputer voltage regulating device 1 sets
2 sets of 4 test electrode
5 test oil box of 1
1 sets of 6 electromagnetic automatic discharge device
1 sets of 7 voltage breakdown of computer measurement and control software
1 sets of 8 computer
9 color ink jet printer 1
The 10 national level measurement and identification of quality inspection certificate in 1 copies
11 the instructions for use of products 1
12 Certificate in 1 copies
1, the instrument should be installed with independent earthing.
2, before starting the first with the methods of operation, the operator must.
3, the instrument can not be used in the gas environment of strong corrosive gas andparticle impurities..
4, test temperature of 15 degrees to 25 degrees, relative humidity 60% to 70%
5, the sample breakdown instant sparks generated and accompanied by sound, is a normal phenomenon.
Must carry on the high voltage electrode discharge with high voltage discharge rod 6,every change of the high voltage electrode samples or contact, discharge more than 5 seconds.
7, each test before, must check the instrument grounding.
以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，化工儀器網對此不承擔任何保證責任。 溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。
