產品性能:

無論是在工業噴涂，任務測試，防腐還是車輛評估，QNix5500涂層測厚儀都可以zuida限度地滿足對涂層厚度的快速和便捷測量，只需要開機，將儀器置于工件表面就可獲得測量數據，而無需進項一系列的設置操作。

QNix5500涂層測厚儀較大探頭座和儀器低重心設計，保證儀器測量時探頭放置平穩，避免出現非正常值。在測量小工件或有角度的區域時，可以用探頭導線瞬間將儀變身為分體機，方便測量。其直角連接線可以起到直角探頭的作用，用于管道類狹窄空間。

QNix5500涂層測厚儀帶自動翻轉功能的2吋彩色液晶，能在任意位置和角度，即使在光線黑暗環境，例如大型罐倉，橋梁下，亦或是陽光下，都可以清晰顯示測量數據。液晶上同時顯示統計數據，比如：平均值，zuida值，zui小值以及標準偏差。

德國QNIX5500系列相關型號：

QNix5500Fe3mm涂層測厚儀  基體：Fe磁性基體，測量范圍：0-3000微米，探頭：一體探頭

QNix5500Fe5mm涂層測厚儀  基體：Fe磁性基體，測量范圍：0-5000微米，探頭：一體探頭

QNix5500Fe/NFe3mm涂層測厚儀  基體：Fe/NFe兩用基體，測量范圍：0-3000微米，探頭：一體探頭

QNix5500Fe/NFe5mm涂層測厚儀  基體：Fe/NFe兩用基體，測量范圍：0-5000微米，探頭：一體探頭

QNix5500Fe1.2mm涂層測厚儀  基體：Fe磁性基體，測量范圍：0-1250微米，探頭：分體探頭

QNix5500Fe3mm涂層測厚儀  基體：Fe磁性基體，測量范圍：0-3000微米，探頭：分體探頭

QNix5500Fe5mm涂層測厚儀  基體：Fe磁性基體，測量范圍：0-5000微米，探頭：分體探頭

QNix5500NFe3mm涂層測厚儀  基體：NFe非磁性基體，測量范圍：0-3000微米，探頭：分體探頭

QNix5500NFe5mm涂層測厚儀  基體：NFe非磁性基體，測量范圍：0-5000微米，探頭：分體探頭

QNix5500Fe/NFe1.2mm涂層測厚儀  基體：Fe/NFe兩用基體，測量范圍：0-1250微米，探頭：分體探頭

QNix5500Fe/NFe3mm涂層測厚儀  基體：Fe/NFe兩用基體，測量范圍：0-3000微米，探頭：分體探頭

QNix5500Fe/NFe5mm涂層測厚儀  基體：Fe/NFe兩用基體，測量范圍：Fe0-5mm,探頭：分體探頭

QNix® 5500

The coating thickness gauge

All functions at a glance

Safety by precision and trueness

For valid results in quality assurance

• High measuring trueness over the entire range

• High repeatability of measured results

• Temperature compensation directly

in the sensor

Robustness and resistance

For long and reliable use, even under

harsh conditions

• Fiberglass reinforced, 5 piece casing with IP65

dust and splash water protection

• Three layer protection to absorb shocks

• LCD glass providing resistance against scratches

and chemicals (Level H6)

• Stainless steel probe with dust protection

membrane (IP65)

Time saving by ergonomics

Fast working progress for fatigue-proof

continuous use

• Luminosity IPS-LCD, 2“, colour, 350 cd/m2

,

reading angle 70°

• Automatic flip display 0°, 90°, 180°, 270°

• Low centre of gravity with large contact surface

for precise measuring

Flexibility and expandability

Future-proof by changeable probes

• Gauge body suitable for Fe-, NFe- and

dual-probes

• Integrated probe and cable probe available

in one device

• Increased readiness for use by quick

change of probes

The QNix® 5500 is handy, extremely robust, ergonomic and designed for continuous use.

Decide for yourself if you want to use the gauge with inserted probe or with the robust drag chain.

Just in case, simply unplug the cable, insert the probe into the gauge and continue measuring.

Whether in industrial coating or job coating, in

heavy corrosion protection or in vehicle evaluation by automotive experts and retailers: The

QNix® 5500 supports you optimally in checking

your coatings quickly without extensive set up of

the gauge - switch it on, place on surface, and read

the measurement.

The bright, 2" large colour LCD with automatic

flip display makes it easier to read the values in

any position – even in dim conditions like in dark

areas inside tanks or bridges or when working in

bright sunlight. The gauge displays all necessary

statistical information of your current measurement sequence like mean value, maximum and

minimum value and standard deviation.

The large foot and low centre of gravity ensures

correct placement and avoids incorrect measurements. To measure small or angled areas

simply use the probe cable and transform the

QNix® 5500 into a cable device within a few

seconds. The angled cable connection facilitates

working even in small spaces.

The one button operation allows you fast zero

adjustment on your base metal or on the supplied

zero plates.

For every application, there is the right probe,

which is precise and true over the entire measuring range varying from 1,25 mm and 3 mm up to

5 mm, available as Fe-, NFe- or dual probes.

北京八零時代科技發展有限公司為德國QNIX公司尼克斯中國代理商。

為您QNIX公司涂層測厚儀，現貨供應，免費提供咨詢，測試，培訓。