C-Chamber 細胞培養托盤室

多重效率

c室是細胞中心亞室培養系統的基礎。它由我們的任何氣體控制器（所有生物活性氣體，如O2、CO2、CO、NO等）實現功能化。

標準孵化器的優化與保護

在門關閉后，我們的氣體控制器將迅速將C室內的空氣恢復到您預先編程的設置，將您的電池暴露在室內氧氣水平的時間降到低。如果與細胞中心的超級細胞室系統一起使用，暴露在室內的氧氣水平將被*去除。

運輸方便

用于細胞培養系統的培養箱子室的空間效率設計允許您在的條件下培養盡可能少的或盡可能多的培養皿，同時使用少的氣體。在一個完整的培養箱或手套箱中，的氧氣水平會消耗大量的氣體。

孵化器實用

室內托盤、水盤、導軌和五金件均采用300系列不銹鋼制造。用于細胞培養系統的培養箱子室由透明聚碳酸酯制成，門封具有磁性。溫度由宿主培養箱控制。

C-Chamber 細胞培養托盤室

MULTIPLE EFFICIENCIES
The C-Chamber is the foundation of the cytocentric subchamber cell culture system. It is functionalized by any of our gas controllers (for all bioactive gases, e.g. O2, CO2, CO, NO, etc.)

OPTIMIZATION & PROTECTION IN STANDARD INCUBATORS
After the door is closed, our gas controller(s) will quickly restore the atmosphere inside the C-Chamber to your pre-programmed settings, minimizing the time your cells are exposed to room oxygen levels. If used with a cytocentric superchamber system, exposure to room oxygen levels is removed entirely.

EASY TRANSPORT
The space-efficient design of the incubator subchamber for cell culture systems allows you to culture as few or as many plates as you require in precise conditions with minimal gas usage. Extreme oxygen levels consume large amounts of gas in a full incubator or glovebox chamber.

PRACTICAL FOR INCUBATORS
Chamber trays, water pan, guides and hardware are all made of 300 series stainless steel. The incubator subchamber for cell culture systems is made of clear polycarbonate and the door seal is magnetic. Temperature is controlled by the host incubator.