A2FO力士樂REXROTH柱塞泵

A2FO力士樂REXROTH柱塞泵泵的設計是在開放電路。
項目計劃、裝配和調試，需要有合格人員參與。
服務線路端口和功能端口只設計為適應液壓管路。
在操作過程中，有一個燒傷的危險。采取適當的安全防范措施，如穿防護服
在泵（工作壓力、流體溫度）的工作狀態下，可能會有變化的特性。
的擰緊力矩：
?本數據表中規定的擰緊力矩zui大值，不得超過（螺紋的zui大值）。
制造商對所使用的配件的zui大允許的擰緊力矩的指令必須進行觀察！
- DIN 13的固定螺絲，建議檢查擰緊力矩分別根據VDI 2230版2003。
此處包含的數據和信息必須遵循。

The A2FO pump is designed to be used in open circuits.
– Project planning, assembly, and commissioning of the pump require the involvement of qualified personnel.
– The service line ports and function ports are only designed to accommodate hydraulic lines.
– During and shortly after operation, there is a risk of burns on the pump. Take suitable safety precautions, e.g. wear protective clothing
– There may be shifts in the characteristic depending on the operating state of the pump （operating pressure, fluid temperature）.
– Tightening torques:
- The tightening torques specified in this data sheet are maximum values and must not be exceeded
（maximum values for screw thread）.
Manufacturer's instruction for the max. permissible tightening torques of the used fittings must be observed!
- For DIN 13 fixing screws, we recommend checking the tightening torque individually according to VDI 2230 Edition 2003.
– The data and information contained herein must be adhered to.