甲乙型流感病毒診斷試劑盒（愛思普林）

廣州健侖生物科技有限公司

廣州健侖長期供應各種流感檢測試劑，包括進口和國產的品牌，主要包括日本富士瑞必歐、日本生研、美國BD、美國NovaBios、美國binaxNOW、日本積水、日本榮研、美國OSOM、芬蘭、愛思普林、英國Clearview、凱必利、廣州創侖等主流品牌。

甲乙型流感病毒診斷試劑盒（愛思普林）

我司還提供其它進口或國產試劑盒：登革熱、瘧疾、流感、A鏈球菌、合胞病毒、腮病毒、乙腦、寨卡、黃熱病、基孔肯雅熱、克錐蟲病、違禁品濫用、肺炎球菌、軍團菌、化妝品檢測、食品安全檢測等試劑盒以及日本生研細菌分型診斷血清、德國SiFin診斷血清、丹麥SSI診斷血清等產品。

歡迎咨詢

歡迎咨詢2042552662

想了解更多的產品及服務請掃描下方二維碼：

【公司名稱】 廣州健侖生物科技有限公司
【市場部】    楊永漢

【】 
【騰訊  】 2042552662
【公司地址】 廣州清華科技園創新基地番禺石樓鎮創啟路63號二期2幢101-103室

1、 一抗從4度拿出后，為什么要進行37度復溫？
（1）一方面，防止切片從4度直接放入PBS易脫片；
（2）另一方面，使抗原抗體結合更穩定。一般不需要，但對表達較弱的抗原可能有用，4度和37度時分子運動方式不同，前者分子碰撞機率和運動速度小于后者，后者結合更快，但敏感性也提高了并易造成非特異染色。
（3）其實，我更贊同后一種說法，因?yàn)槲覈L試把肝臟或睪丸片子從4度過夜拿出后，直接用PBS洗沒發生過脫片現象。
2、切片染色后背景太深，如何區分特異性與非特異性著色？
全片著色是指整個切片全都染上了顏色，著色的強度可深可淺，總之，分不清那些組織是陽性那些組織是陰性。出現這種現象的原因有：
（1）抗體濃度過高：一抗?jié)舛冗^高是常見的原因之一。解決辦法是，每次使用新抗體前應當對其工作濃度進行測試，使每一抗體個體化，找到適合自己實驗室的理想工作濃度，既使是即用型的抗體也應如此，不能只簡單的按說明書進行染色。
（2）抗體孵育時間過長或溫度較高：解決辦法是，嚴格執行操作規程，隨身佩帶報時表或報時鐘，及時提醒，避免因遺忘而造成時間延長。現在流行的二步法（Polymer）敏感性很高，要求一抗孵育的時間不是傳統的1小時，而是30分鐘，因此，要根據染色結果進行調整。

1, the first antibody out from 4 degrees, why 37 degrees rewarming?
(1) On the one hand, to prevent slicing directly into PBS from 4 degrees easy to strip;
(2) On the other hand, antigen-antibody binding is more stable. Generally not needed, but may be useful for poorly expressed antigens, 4 and 37 degrees when the molecular movement in different ways, the former molecular collision probability and speed less than the latter, the latter combination of faster, but the sensitivity also increased and easy Cause non-specific staining.
(3) In fact, I agree with the latter statement, because I tried to wash the liver or testis out of the night after 4 degrees, directly washed with PBS did not have the phenomenon of delamination.
2, slice background is too dark, how to distinguish between specific and non-specific coloring?
Whole-piece coloring refers to the entire section of the color dyed, the depth of the shading can be shallow, in short, can not l those organizations are positive those organizations are negative. The reasons for this phenomenon are:
(1) antibody concentration is too high: a high concentration of anti-one is a common cause. The solution is to test the working concentration before each use of the new antibody so that each antibody is individualized to find the ideal working concentration for your laboratory, even for ready-to-use antibodies, not just simple According to the instructions for staining.
(2) antibody incubation time is too long or high temperature: The solution is to strictly enforce the rules, it is best to wear timepieces or clock, timely reminder to avoid the delay caused by the forgotten. Now the popular two-step method (Polymer) high sensitivity, requiring a first antibody incubation time is not the traditional one hour, but 30 minutes, therefore, according to the staining results to be adjusted.