Standard Size in 1.25 x 0.8 x 0.4 inches Five-side shielded Aluminum with Non-Conductive base, Black Anodize Operating Temperature: -25~70 degrees 4:1 Wide Input Range Low Cost but High Reliability Regulated Output Low Ripple and Noise
download SPC.
Specification
1.All specificationsvalid at nominal input voltage,full load and +25°Cafter warm-up time unless otherwise stated. 2.Measured with 0.1U 50V // 47U 50V Ceramic Cap. Cross to output
Input Specification
Characteristics
Conditions
Voltage Range
4:1 Range:
9 ~ 36 VDC 18 ~ 75 VDC
Filter
type
Output Specification
Characteristics
Conditions
Output Power
5 Watt (max.)
Voltage Accuracy (Full Load and Nominal Vin)
Single:
±2%
Dual:
±2%
Minimum Load (at Full Load)
Line Regulation (LL to HL at Full Load)
Single:
±0.5%
(typ.)
Dual:
±0.5%
Load Regulation (1 to at Full Load)
Single:
3.3S:±3% others:±1%
(typ.)
Dual:
±1%
Ripple (20MHz bandwidth)
<0.2% Vout+40mV
(max.)
Noise (20MHz bandwidth)
<0.5% Vout+50mV
(max.)
Temperature Coefficient
±0.02% / °C (max.)
Short Circuit Protection
Current limit, Auto-recovery
General Specification
Characteristics
Conditions
Switching Frequency
300K Hz (typ.)
Isolation Voltage (Input to Output)
1600 VDC (min.)
Operating Temperature
-25 °C to +70°C (at Full Load)
Storage Temperature
-55 ℃ to +105 ℃
Humidity
95% RH (max.)
Cooling
Free air convection
Physical Specification
Characteristics
Conditions
Dimension (Tolerance ±0.5)
31.8 x 20.3 x 10.2 mm
1.25 x 0.8 x 0.4 inches
Weight
13 g
Case Material
Five-side shielded Aluminum with Non-Conductive base, Black Anodize
16
type
