rep rate:

2.0 hz to 500 khz

width:

100 ns to 1 ms

delay:

250 ns to 10 ms

rise time:

50 ns to 10 us (10 % - 90 %) in 8 steps

decay time:

0.5 us to 1.0 ms (100 % - 37 %) in 11 steps

amplitude

0.0 to 10.0 v (0 to 5 v into 50 ohms) scaleable in energy units. (kev)

resolution:

155 uv

jitter:

± 10 ppm

attenuation:

0, 2, 5, 10, 20, 50, 100, 200, 500, 1000

integral non-linearity:

± 15 ppm

temperature stability:

± 5 ppm per oc from 20oc to 45oc

pulse type:

flat-top or tail pulse - in tail mode, rise time is a fixed 50 ns, decay time is adjustable. in flat-top mode, both rise time and decay time are adjustable.

polarity:

positive/negative

ext. trigger:

0 to 500 khz, +100 mv to +3.5 v, threshold adjustable.

width:

100 ns to 1 ms

modes:

single pulse via a front panel pushbutton;
internal rep rate;
external trigger;
external gate with the same pulse requirements as ext trig;
internal ramp-adjustable start and stop points; adjustable ramp period 30-900 s, se-lectable number of ramp cycles, ramp in kev or volts. clamped baseline option to bring the baseline to zero prior to the next pulse.

stored settings:

up to 9 complete configurations with recall. also stores parameters in use at shutdown for automatic recall when powered on.

remote:

rs232 at 9600 baud.

power required:

+24v , 170 ma
-24v , 150 ma
+12v , 450 ma
-12v , 5 ma
portable power supply available for applications that require portability or benchtop use. see bnc model ap-3 portable nim power supply.

mechanical:

triple-width aec nim module 4.05" wide x 8.70" high in accordance with tid-20893 ( rev 3. ).

weight:

2 lbs. 13 oz. net, 6 lbs shipping.