124-33柔性導電膠

說明：124-33是一種柔性導電膠。這個產品的特點很好

粘附到Kapton？、Mylar？、玻璃和各種其他基材上。不像傳統的傳導

材料方面，本產品具有很強的抗折性。產品可以通過

簡單的加熱和輕微的壓力。124-33的一些應用包括但不限于：

EMI/RFI外殼中表面安裝設備和熱封開口的電氣附件。124個-

33適用于在非常低的溫度下需要靈活性的應用。124-33具有更高的玻璃

轉變溫度比常規106-48低，電阻率比107-02低。

典型固化特性：

稠度液體

填充銀

抗皺性佳

體積電阻（Ω-cm）0.0005

片材電阻率（Ω/sq./mil）0.20

水解穩定性優異

有效溫度范圍（攝氏度）-55至120

熱穩定性（攝氏度）達到200

建議的處理和固化：124-33已準備好按供應使用。進一步變薄可能是

通過添加少量的cmi稀釋劑203來完成。使用前一定要重新掛起

銀色的。對于大多數應用來說，在100℃下干燥幾分鐘后

在175℃下固化5-10分鐘。通過在

溫度范圍為50°C至175°C。用作密封劑時，將粘合劑涂在

粘合并在150°C下干燥幾分鐘，然后在加熱和涂抹時將基板放在一起

輕微的壓力。建議終用戶通過實驗確定適合的溫度和時間

個人申請。

貯存期：25℃下保存6個月；5℃下保存9個月；或-10℃下保存12個月。

安全和操作：在通風良好的情況下使用。遠離火花和明火。避免

長時間接觸皮膚和吸入蒸汽。用肥皂和水清洗皮膚。

124-33柔性導電膠

124-33
FLEXIBLE ELECTRICALLY CONDUCTIVE ADHESIVE
DESCRIPTION: 124-33 is a flexible electrically conductive adhesive. This product features excellent
adhesion to Kapton®, Mylar®, glass and a variety of other substrates. Unlike conventional conductive
materials, this product is very resistant to flexing and creasing. Product can be re-bonded many times by
simply applying heat and slight pressure. Some applications for 124-33 include, but are not limited to,
electrical attachments for surface mounted devices and heat-sealing openings in emi/rfi enclosures. 124-
33 is useful for applications requiring flexibility at very low temperatures. 124-33 features a higher glass
transition temperature than the conventional 106-48 and a lower resistivity than 107-02.
TYPICAL CURED PROPERTIES:
Consistency Liquid
Filler Silver
Crease Resistance Excellent
Volume Resistance (Ω-cm) 0.0005
Sheet Resistivity (Ω/sq./mil) 0.20
Hydrolytic Stability Excellent
Useful Temperature Range (°C) -55 to 120
Thermal Stability (°C) Good to 200

SUGGESTED HANDLING & CURING: 124-33 is ready to use as supplied. Further thinning may be
accomplished by adding small amounts of CMI Thinner #203. Prior to using, be certain to re-suspend
silver. Best properties, for most applications, result when dried several minutes at 100°C followed by
curing for 5-10 minutes at 175°C. Good properties are obtained on a variety of substrates by curing at
temperatures ranging from 50°C to 175°C. When used as a sealant, apply adhesive to surfaces to be
bonded and dry for several minutes at 150°C, then place substrates together while heating and applying
slight pressure. End user is advised to experimentally determine temperature and time best suited for
individual applications.
STORAGE: Shelf life: 6 months at 25°C; or 9 months at 5°C; or 12 months at -10°C.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid
prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.