廠家：劉萍--150 2109 3014  :

多功能小型有機溶劑噴霧干燥機主要適用于高校、研究所和食品醫藥化工企業實驗室生產微量顆粒粉末，對所有溶液如乳濁液、懸浮液具有廣譜適用性, 適用于對熱敏感性物的干燥如生物制品、生物農藥、酶制劑等，因所噴出的物料只是在噴成霧狀大小顆粒時才受到高溫，故只是瞬間受熱，能保持這些活性材料在干燥后仍維持其活性成份不受破壞。

Mainly applicable to the University, Institute of food and pharmaceutical chemical industry laboratory production of micro particles of all solutions such as emulsion, suspension has broad applicability, suitable for heat sensitive materials such as drying of biological products, bio pesticides, enzyme preparation, high temperature is only because of the sprayed material is mist particle size in the spray, so just instant heating, can keep the active material is not damaged after drying and still maintain its active ingredients.

多功能小型有機溶劑噴霧干燥機特點：

1.采用彩色大觸摸屏操作，全自動控制和手動控制相結合，十段程序控溫，自帶記憶功能，國內*：
2.全自動控制：一鍵式開機，設定噴霧工藝參數后，溫度到達預定溫度，蠕動泵自行啟動，觸摸屏上顯示運行動畫，運行流程清晰顯示；關機時只需按停止鍵，機器自動安全關機。
3.手動控制：如需在實驗過程對工藝參數進行調整，可方便切換至手動狀態，整個實驗過程彩色觸摸屏動態顯示（動畫）。
4.關機保護功能：關機時只需按停止鍵，機器除風機外立即停止運行，保證設備不會因為誤操作（強行關風機）而導致加熱部分燒壞。
5.噴霧、烘干及收集系統采用優質的不銹鋼材料制造，使得噴霧干燥過程在無污染及zui穩定的環境下進行，為科研人員掌控實驗進程及實驗結果提供了*的便利,并能及時發現解決問題。所有不銹鋼元件易拆卸，易清洗。
6.有機溶劑噴霧干燥機內置進口全無油空壓機，噴粉的顆徑呈正態分布，流動性非常好，而且噪音非常低，小于60db，符合國家實驗室噪音標準；
7.二流體噴霧的霧化結構，整機采用優質不銹鋼材料精密制造，設計緊湊，無需附屬設備，方便使用，歷久如新。廠家：劉萍--150 2109 3014  :
8.為了滿足用戶在實驗范圍調節各項參數的要求，在干燥溫度控制的設計上采用實時調控PID恒溫控制技術，使全溫區控溫準確，加熱控溫精度±1℃。
9.為了保持樣品的純凈，配備了進風口過濾器。
10.進料量可通過進料蠕動泵調節，zui小樣品量可達50ml。磁力攪拌器可選
11.干燥后的成品干粉，其顆粒度較均勻，95%以上的干粉在同一顆粒度范圍。
12.小型噴霧干燥機針對黏性物料，設有噴咀清潔器（通針），在噴咀被堵塞時，會自動清除，通針的頻率可自動調整；
13.創新的塔壁吹掃裝置，物料回收率更高。
14.自動清掃功能，大大加強干燥樣品回收率。
15.干燥塔自動清洗功能，無需手動清洗，大大節省實驗時間

1 the use of large color touch screen operation, automatic control and manual control of the combination of the ten temperature control procedures, with memory function, the only domestic:
2 automatic control: one button start, set spray process parameters after the temperature reaches a predetermined temperature, the peristaltic pump to start operation, touch screen animation display, clear display operation process; shutdown just press the stop button, the machine automatically shut down safety.
3 manual control: if you need to adjust the process parameters in the experimental process, you can easily switch to the manual state.
4 shutdown shutdown protection function: just press the stop button, the machine in addition to the wind outside the machine immediay stop running, to ensure that equipment is not because of misoperation (forced off fan) to burn heating part.
5, spray drying and collection system of the use of high-quality stainless steel materials, the spray drying process in no pollution and the most stable environment, the experimental process and the experimental results provide a great convenience for researchers to control, and can timely find and solve problems. All stainless steel components are easy to disassemble and clean.
6 organic solvent spray dryer built-in imported oil free air compressor, the powder particle size distribution, liquidity is very good, and the noise is very low, less than 60dB, meet the noise standards of national laboratory;
7 two fluid spray atomization structure, precision manufacturing machine adopts high quality stainless steel material, compact design, without ancillary equipment, convenient use, lasting.
8 in order to meet the requirements of the user to adjust the parameters in the experimental range, in the design of the drying temperature control using real-time control of PID temperature control technology, so that the whole temperature zone temperature control accuracy, heating temperature control accuracy of + 1.
9 in order to maintain the purity of the sample, equipped with air inlet filter.
10 feed quantity can be adjusted by feeding peristaltic pump, the minimum sample size up to 50ml. Magnetic stirrer optional
11 dry finished powder, its particle size is more uniform, more than 95% of the dry powder in the same particle size range.
12 small spray dryer for viscous material, is provided with a nozzle cleaner (needle), is blocked at the nozzle, will automatically remove the needle, the frequency can be adjusted automatically;
13 innovative tower wall purging device, material recovery rate is higher.
14 automatic cleaning function, greatly enhance the recovery rate of dry samples.
15 drying tower automatic cleaning function, without manual cleaning, saving time

1 the use of large color touch screen operation, automatic control and manual control of the combination of the ten temperature control procedures, with memory function, the only domestic:
2 automatic control: one button start, set spray process parameters after the temperature reaches a predetermined temperature, the peristaltic pump to start operation, touch screen animation display, clear display operation process; shutdown just press the stop button, the machine automatically shut down safety.
3 manual control: if you need to adjust the process parameters in the experimental process, you can easily switch to the manual state.
4 shutdown shutdown protection function: just press the stop button, the machine in addition to the wind outside the machine immediay stop running, to ensure that equipment is not because of misoperation (forced off fan) to burn heating part.
5, spray drying and collection system of the use of high-quality stainless steel materials, the spray drying process in no pollution and the most stable environment, the experimental process and the experimental results provide a great convenience for researchers to control, and can timely find and solve problems. All stainless steel components are easy to disassemble and clean.
6 organic solvent spray dryer built-in imported oil free air compressor, the powder particle size distribution, liquidity is very good, and the noise is very low, less than 60dB, meet the noise standards of national laboratory;
7 two fluid spray atomization structure, precision manufacturing machine adopts high quality stainless steel material, compact design, without ancillary equipment, convenient use, lasting.
8 in order to meet the requirements of the user to adjust the parameters in the experimental range, in the design of the drying temperature control using real-time control of PID temperature control technology, so that the whole temperature zone temperature control accuracy, heating temperature control accuracy of + 1.
9 in order to maintain the purity of the sample, equipped with air inlet filter.
10 feed quantity can be adjusted by feeding peristaltic pump, the minimum sample size up to 50ml. Magnetic stirrer optional
11 dry finished powder, its particle size is more uniform, more than 95% of the dry powder in the same particle size range.
12 small spray dryer for viscous material, is provided with a nozzle cleaner (needle), is blocked at the nozzle, will automatically remove the needle, the frequency can be adjusted automatically;
13 innovative tower wall purging device, material recovery rate is higher.
14 automatic cleaning function, greatly enhance the recovery rate of dry samples.
15 drying tower automatic cleaning function, without manual cleaning, saving time

1 the use of large color touch screen operation, automatic control and manual control of the combination of the ten temperature control procedures, with memory function, the only domestic:
2 automatic control: one button start, set spray process parameters after the temperature reaches a predetermined temperature, the peristaltic pump to start operation, touch screen animation display, clear display operation process; shutdown just press the stop button, the machine automatically shut down safety.
3 manual control: if you need to adjust the process parameters in the experimental process, you can easily switch to the manual state.
4 shutdown shutdown protection function: just press the stop button, the machine in addition to the wind outside the machine immediay stop running, to ensure that equipment is not because of misoperation (forced off fan) to burn heating part.
5, spray drying and collection system of the use of high-quality stainless steel materials, the spray drying process in no pollution and the most stable environment, the experimental process and the experimental results provide a great convenience for researchers to control, and can timely find and solve problems. All stainless steel components are easy to disassemble and clean.
6 organic solvent spray dryer built-in imported oil free air compressor, the powder particle size distribution, liquidity is very good, and the noise is very low, less than 60dB, meet the noise standards of national laboratory;
7 two fluid spray atomization structure, precision manufacturing machine adopts high quality stainless steel material, compact design, without ancillary equipment, convenient use, lasting.
8 in order to meet the requirements of the user to adjust the parameters in the experimental range, in the design of the drying temperature control using real-time control of PID temperature control technology, so that the whole temperature zone temperature control accuracy, heating temperature control accuracy of + 1.
9 in order to maintain the purity of the sample, equipped with air inlet filter.
10 feed quantity can be adjusted by feeding peristaltic pump, the minimum sample size up to 50ml. Magnetic stirrer optional
11 dry finished powder, its particle size is more uniform, more than 95% of the dry powder in the same particle size range.
12 small spray dryer for viscous material, is provided with a nozzle cleaner (needle), is blocked at the nozzle, will automatically remove the needle, the frequency can be adjusted automatically;
13 innovative tower wall purging device, material recovery rate is higher.
14 automatic cleaning function, greatly enhance the recovery rate of dry samples.
15 drying tower automatic cleaning function, without manual cleaning, saving time

技術參數

產品說明：JOYN-8000T

進風溫度控制：室溫-300℃連續可調

出風溫度控制：室溫-140℃

蒸發水量：2000ml/H

zui大進料量：2000 ml/H

電加熱器功率：4.5KW    AC220V  單相+地

風機：0.4KW   zui大風量5.5 m³/min   zui大風壓686Pa

壓縮空氣工作壓力：2-5Bar

空氣壓縮機：0.6KW   zui大產器量4.2 m³/h

設備外形尺寸：770*590*1380（mm）L*W*H

噴嘴口徑；標配 0.75mm

Product Description: JOYN-8000T
Intake air temperature control: room temperature -300 C continuous adjustable
Air temperature control: room temperature -140 C
Evaporation water: 2000ml/H
Maximum feed quantity: 2000 ml/H
Electric heater power: 4.5KW AC220V single phase + ground
Fan: 0.4KW maximum volume 5.5 m /min fand maximum wind pressure 686Pa
Compressed air working pressure: 2-5Bar
Air compressor: 0.6KW the maximum output of 4.2 m /h fand measure
Equipment dimensions: 770*590*1380 (mm) L*W*H
Nozzle caliber; standard 0.75mm